Vantrue N2 Pro Uber Dual 1080P Dash Cam | Vantrue X4S dual 4k+1080P Dash cam | Vantrue N1 Pro 1080P Mini Dash Cam | Vantrue N4 Three Way Dash Cam | Vantrue S1 Front and Rear | Vantrue M2 2.5K Mirror Dash Cam | |
---|---|---|---|---|---|---|
Resolution | Dual:1920*1080 30fps, Single Front 1920x1080 60fps or 2560x1440 30fps | Dual:4K+1080P@30fps, Single Front:4K 2160P@30fps/1440P@60fps/1080P@120FPS | 1920x1080 30fps | Three Way: 1440P+1080P+1080P Dual: 1440P+1080P Single Front: 1520P | Dual:1920x1080 30fps, Single Front 2880*2160P 24fps or 1920*1080P 60fps | Dual: 1440P + 1080P 30FPS |
Camera Type | Front+Inside | Front+Rear | Front | Front+Inisde+Rear | Front+Rear | Front+Rear |
Lens | F/1.8,170°+ F/2.0, 140° | F/1.7,131°+ F/2.0, 131° | F/1.8, 160° | F/1.4,155°+ F/2.0, 165°+F/1.8, 160° | F/1.47,170°+ F/1.8, 160° | F/1.55,148°+ F/1.8, 140° |
Display | 1.5 inch | 3 inch | 1.5 inch | 2.45 inch | 2 inch | 12 inch |
Battery & Charging | Built in battery | Supercapacitor | Built in battery | Supercapacitor | Supercapacitor | Supercapacitor |
GPS Logger | Optional | Optional | Optional | Optional | Optional | Optional |
Storage | Up to 256GB MicroSD Card | Up to 256GB MicroSD Card | Up to 256GB MicroSD Card | Up to 256GB MicroSD Card | Up to 256GB MicroSD Card | Up to 256GB MicroSD Card |
Microphone & Speaker | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection
Mini, ACS, ATO, Micro2 Add a Circuit Fuse Holders, Low Voltage Protection
24/7 Parking Surveillance
| Compatible 12 – 24V VehiclesThis hardwire kit accepts voltage from any type of vehicles runs on 12 – 24V, works perfect for car, truck, bus, suvs, or big rig for continuous power. | Low Voltage ProtectionSmart low voltage protection automatically shut off the power to your dash cam when the battery voltage drops to 11.6V(12V cars) or 23.2V(24V cars), thus preventing it draining the battery. |
Find the Correct Fuse SlotOpen the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on. | Connect the Red WireOnce you've determined which fuse slots you need to use for your hardwiring kit you can crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation. | Ground the Hardwiring KitSlip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterwards. |
Specs
Support
FAQ