VANTRUE: High-end Dash Cam for Your Drive 
Free Fast Shipping for orders over $200. Please allow 2-3 business days for shipping. Delivery times may delay due to COVID-19

Firmware Download

Vantrue N4 Dash Cam Firmware Update (Specially for Japan)

  • Release time: 2020-08-11 09:29:17
  • Version: VTN40A.V5_JP
  • File size: 10.1M

Update Log

VTN40A.V5 (New)2020-08-10

  1. 1. Increased resolution
    Single front: 2160P 30FPS
    Front + cabin: 2160P+1080P 25FPS
    Front + rear: 2160P+1080P 25FPS
    Front + cabin + rear: 2160P+720P+720P 25FPS (2160P 25FPS / 720P 30FPS)
    2. Increased collision detection sensitivity in Parking Mode. The dash cam will now detect the opening and closing of car doors.
    There's some tweaks about the motion detection. Once detecting movement, the dash cam will start recording for 1 minute. the dash cam will exit Parking Mode and enter driving mode if it detects movement again in 1 minute. For it to enter Parking Mode again, there should be 5 minutes without collision detected. If there's no collision detected again within that 1 minute, the dash cam will record a 1-min video and power off and activate collision detection again.
    3. Auto LCD off has been changed to Auto by default.
    ① The brightness of the LCD will decrease to 50% 3 minutes after no actions and will resume to 100% with the press of a button unless the temperature of the dash cam has exceeded 115℃.
    ② the LCD will power off automatically 1 minute after entering Parking Mode. (It was 3 minutes before)
    ③ The dash cam will continue recording and power off the LCD if its temperature exceeds 115℃. The dash cam will power off by force and activate motion detection if its temperature stays over 115℃ for 3 minutes.
    ④ The brightness of the LCD will resume to 50% if the temperature decreases to 110℃.
    ⑤ The collision detection will be activated regardless of which option of Parking Mode the dash cam has selected before(ON or OFF), as long as the forced power off is caused by high temperature. (This does not apply to any other situations of dash cam powering off)
    4. A pop-up window will appear when user chooses Parking Mode:"Please activate collision detection under blazing summer. Confirm"
    5. RTC will reset time based on the latest time of the files. If the time of dash cam has been reset to Jan,1st,2030, the time of the files will be postponed a little based on the latest time of the dash cam, avoiding it overwriting the latest videos. A pop-up window will occur showing "Please set the time" every time the user turns on the dash cam and disappears after 5 seconds. The dash cam will record videos normally when the pop-up appears. (This window won't appear if the time is before year 2030) The pop-up window will appear as "Please set the time"
    6. The translation of Polish language has some tweaks. Ustawienia fabryczne > Przywróci? ustawienia domy?lne?> Anuluj Jeste? has been changed to Ustawienia fabryczne > Przywróci? ustawienia domy?lne?> Anuluj OK
    7. G-Sensor has been changed to level 1-5 (1,2,3,4,5,OFF). It's 3 by default.
    8.Added 1S FPS to the Timelapse recording, the options have been changed to (1FPS,5FPS,OFF). It's OFF by default.
    9. Improved acc on entering and exiting motion detection Parking Mode.
    10. Added a notification message "Please format the card" when detecting a faulty SD card.
    11. Fixed a bug where system crash will occur when user turns off the dash cam manually or chooses main channel or 3-channel during motion detection.
    12. Added a parking icon when the dash cam is turned on by the G-Sensor during collision detection.

VTN40A.V3 2020-05-13

  1. 1. Added Japanese version software.
    2. When loop recording is turned off, the dash cam will stop recording after a 20 min footage.
    3. When overwriting the old footages, footages recorded at the same period by 3 cameras will be deleted altogether.
    4. Fixed a bug where the dash cam won't turn off the screen in replay interface when reaching the time set by the screensaver.
    5. After pause or finish playing the video in video replay interface, the dash cam will activate screensaver after 5 minutes of no actions. The screen will go dark after user presses any button and the screen will turn back on after user goes back to playlist and plays a video.
    6. Shows resolution and frame rate when previewing the videos.
    7. Fixed a bug where fonts are in different sizes in different menus.
    8. Fixed a bug where it shows incorrect time when replaying time lapse videos.

VTN40A.V2 2020-03-14

  1. 1. Fixed a bug where it will only start 1 or 2 channels of dash cam after the super capacitor is drained.
    2. When the LCD AUTO OFF is turned on, the dash cam will enter Parking Mode 5 minutes after no movements. Users need to turn on the screen then enter Parking Mode and the screen will turn off 3 seconds after that. The dash cam will start recording without turning on the screen if it detects objects ahead until it exists the Parking Mode.
    3. Fixed a bug where the LCD AUTO OFF won't be activated after the dash exists Parking Mode.
    4. The size of the font of the setting menu has been changed to the same as T3.
    5. Fixed a bug where white bar will cover the font after multiple resetting in a row.
    6. Fixed a bug where the dash cam will keep recording when connecting to PC if "connecting USB" and "powering on" are not chosen.
    7. Fixed a bug where the logo will show up twice when turning on the dash cam after flipping the front and rear camera.
    8. Fixed a bug where the dash cam will return to recording interface after 5 minutes of inactivity when video playback is over.
    9. Fixed a bug where it will still show previous interface when returning to preview interface after users stay at the format interface, reset interface, system info interface.